Hot Tub Maintenance

Hot tub maintenance can be made simple by cutting it down to a 3-step system:

  • Balancing
  • Sanitizing
  • Shocking

Balancing spa water means that the water is neither too alkaline (high pH) which causes destructive scale buildup on equipment, nor too acidic (low pH) which may erode plumbing and cause costly damage to spa pumps, seals and heaters. Balanced water has a more pleasant feel to the skin, and allows your sanitizer to work more effectively. Spa water can be tested by using test strips to check alkalinity on a weekly, or bi-weekly basis. Santa Barbara 22

Water sanitation is arguably the most important out of the 3-step system. Preventing additive chemicals can be made easy by implementing an ozone or salt water system to your hot tub. Not only will a sanitation system ensure that your spa water is always ready to be enjoyed, but it can also reduce the amount of chemicals used to balance or shock spa water. If you do not have a sanitation system, it’s not too late!

Contact your local certified Cal Spas service dealer.

The most important thing to do in preparation for shocking the spa water is to first test the spa, and adjust the pH to the range of 7.2-7.6. Oxidizers work best in a low pH environment, and the efficacy of your spa shock is twice as great at a pH of 7.6, than it is at a pH of 8.0. When shocking the spa, be cautious when using spa shock, oxidizers can be dangerous when misused or mishandled. Different oxidizers have varying strengths – be careful not to overdose your spa shock treatment. High winds can blow spa shock right in your face. Gently pour it over the surface, and clean up any spills right away.

Another way to effectively maintain your hot tub clear of the elements is by implementing a diligent and form fitting spa cover. Find the perfect fitting spa cover for any hot tub brand at www.QuickSpaParts.com and limit the amount of hot tub maintenance you need to perform on your hot tub.calspasblogwinterbanner.jpg

Sanitizing Your Hot Tub

Some people look to hot tubs as a cost-effective alternative to pools. Yes, hot tubs provide the utmost relaxation and hydrotherapy benefits, but all hot tub owners should know that hot tubs aren’t small pools. Maintenance for swimming pools and hot tub water are very different and should be treated as such. It’s all about water chemistry.

New-Waterfall-White

Shock treatment, alkalinity, pH, hard water and sanitizers are all terms that can intimidate any new hot tub owner, however there is no need to fear! Hot tub water maintenance is quite simple.coleman spa 4

– Hot tub water is the perfect breeding ground for microorganisms and bacteria to breed if the water is not treated with the proper sanitizing system. Bacteria from our bodies, as well as airborne mold spores, algae, and even viruses can find their way into the water. Sanitizing systems such as bromine, can effectively destroy microorganisms and bacteria to keep your spa water safe and healthy to use.

– Shock treatment is the routine of applying a treatment to your spa water that oxidizes and diminishes dead organic material left behind from the sanitizing system, and material that is unable to be filtered such as dirt, soap, hair spray and perspiration. These contaminants provide a source of food for bacteria and algae if not treated correctly and in a timely manner. Regular shock treatments eliminate them and the organics on which bacteria feed.

– Alkalinity is measuring the ability of the water to resist changes in pH. Low alkalinity could cause a bigger problem than higher alkalinity. It’s smarter to adjust alkalinity before testing your hot tub pH. Maintaining the proper alkalinity will often bring the pH back to normal.

– Hard water is measured and caused by the amount of calcium dissolved in the water. Insufficient calcium hardness can sometimes promote equipment corrosion and also result in water foaming problems.Hydrotherapy

Cal Spas makes it easy to maintain your hot tub water. Find more information about Cal Spas hot tubs and products, here.